Kohler Magnum 18 HP, Model M18S
Electric start
Gasoline powered
Full pressure lubrication system with spin on filter
Guard to protect engine against material overflow

Choice of fabricated or cast 6" extrusion auger
Optional hollow auger allows for insertion of rebar

Telescoping adjustable wheel assemblies located at front and rear allow independent, fast, easy leveling, elevating and lowering of each wheel on uneven paved surfaces or paving over 2-inch vertical rebar rod

Wheel forks are bolted to telescoping assemblies

Machine can easily be changed over from 6 to 3 or 9 wheels

Positioning of wheel assemblies can be adjusted right, left, forward or backward of machine to allow:

•  Guiding along existing curb or slab
•  Wider base forms
•  Better curves
•  Wheels free of tack coat

Machine height of 12" attainable

Rollerbearing wheels

4-level cubic feet capacity (0.15 cubic yards)
Interchangeable from left to right side of machine

Design utilizes offset curb extrusion
Permits placing of machine at extreme edge of pavement, either side of machine, or along side of any obstacle
Loss of material lessened
Allows curbing with 1" of any edge with most curb form designs
Can be used with concrete or asphalt
Mounting consists of three 1/2" bolts

46" steering handle
Built-in brake hinged at front wheel forks
Repositioning of steering handle at either right or left side of front wheels to give clear view at all times
Adjustable guide for following along chalk or string line
Tie-rod steering

Six gallon capacity
Removable
Quick connect gas line