HMC home page Contact UsAvailable Used Inventory


Click on pictures to enlarge


Easi-Grade 375
The HMC Easi-Grade 375 is a trimmer, which is made to prepare the ground prior to pouring concrete.  The Easi-Grade 375 will trim a path 10 feet wide and convey the materials off to the side with a 24 foot long conveyor.

 Engine
   

John Deere 6081A
Power Tech 250 HP @ 2100 RPM

 Conveyors
   

Discharge conveyor length: 24'
Belt width: 30"
Height, discharge conveyor, ground to discharge end, maximum: 14'
Belt speed: Variable to 600 feet per minute
Swing on discharge conveyor: 120
°

 Wheel Drives
   

Borg Warner No. 10

 Wheel Motors
   

Char-Lynn hydraulic

 Tires
   

Goodyear, 40x19x19.95, 14-ply

 Drive
   

Four wheel hydrostatic-positive traction          

 Sensing System
   

One stringline guides HMC's sensing system to assure perfect steering and grade automatically. Five HMC sensors - two steering, two grade and one cross-level control.

 Trimming Speed
   

0'-50' per minute

 Travel Speed
   

0'-150' per minute

 Accuracy
   

Grade and steering - 1/8" in 10' (3mm in 3 meters)

 Fuel Tank
   

80 gallon capacity

 Hydraulic Reservoir
   

120 gallons

 Dimensions
   

Width: shipping transport - 10' 10"
Length: overall 42"includes conveyor
Height: less stack - 7' 6"

 Operating Weight
   

Approximately 35,000 lbs.

 Warranty
   

One full year on parts of our manufacturer. On component parts, we pass on the warranty as given to us by the manufacturers.

 Note
   

All or any specifications subject to change by manufacturer without prior notice. Substitutions of components can be made without prior notice if, in the manufacturer's opinion, the quality and performance of the machine are not affected. Designed to perform under the most demanding conditions.

Get a price quote

back to top    

 

Home   |   Our Products   |   Our Team   |   About Us   |   Contact Us



Copyright © 2009 Huron Manufacturing Corporation

550 Nevada SW Huron, S.D. 57350 | 800-368-8920 | 605-352-1412